20 Watt or Creo head TH 1.0

First Generation of the Creo Trendsetter Laser head was TH 1.0. These head was not too fast ( Max 192 Laser beams ) and works maximum 20 watts , also Air-cooling system.

40 watt Creo Laser head ( TH 1.7 )

Second Generation of the Creo Trendsetter Laser head was TH 1.7. These head works maximum 40 watts and also water-cooling system. It means for Cooling the Laser head , A liquid ( Coolant) circulate in a System to take out the Heat from the Bod of the head.

50 watt Creo Laser head ( TH 2.X )

3rd Generation of the Kodak Trendsetter Laser head was TH 2.X. These head works maximum 50 watts and also water-cooling system. It means for Cooling the Laser head, a liquid (Coolant) circulate in a System to take out the Heat from the Bod of the head. These head has much more Powerful Laser Diode inside, so it can Expose the Thermal plates much Faster, because of the Faster Drum Speed.

Glunz & Jensen Spare parts

Glunz&Jensen Company Specially Work on Developing Processor. We have a lots of Parts for the all kind of Processor, E.G.

• HPU Board , MCU Board
• Glunz&Jensen Interplater Main motor
• Fuse Board
• Bearing Roller

Turbo MCE Board

Main Controller of 2003 till 2008 Kodak Trendsetter CTP is Turbo MCE Board. MCE means Master Control Electronics. This Board Connect to all Sensor and other Board to Control the main machine.

Motors

We have a lots of Motors for the all kind of Kodak CTP, some motor work with 220 Ac Voltage some of them Work with 24Volt DC. E.G.

• Vacume motor for Creo TH1.0 Head
• Glunz&Jensen Interplater Main motor
• Kodak Polychorome Main motor
• kodak Polychrome washbrush motor

Ware House

We have a Lot of Spare part for all kind of Kodak , Creo or Heidelberg CTP Machine. also We have too much Spare part for Glunz&Jensen and Kodak Polychrome Processor, So we can support out Customer Faster than Expected. We can deliver all parts to around the World by Express Post.